Licensed Electrician in Hialeah, FL

Electrical services in Hialeah

Residential electrical

Homeowners and landlords start at our residential electrician page. Each service below links to its own page.

• Electrical repair and maintenance. We find the cause of dead outlets, flickering lights and failed circuits, and repair it. During troubleshooting and maintenance we check panels and connections with a thermal camera to spot hot spots. Repairs that need a permit get one.
• Circuit breaker repair. A breaker that keeps tripping or will not reset points to a fault that needs a licensed electrician. We diagnose it and replace what is failing.
• Rewiring and new-home wiring. We rewire older homes and wire new construction and additions. The work is permitted and inspected.
• Lighting, outlets and GFCI protection. Recessed and decorative lighting, added outlets and GFCI devices installed to code.
• Panel upgrades and replacement. Homes and businesses, 100 to 600 amp. The full details, process and permit steps are on the panel page.
• Backup generators and EV chargers. Interlock and standby generator setups, and Level 2 EV charger circuits for the garage or driveway. Read our EV charger guide.

Commercial electrical

Property managers, owners and builders start at our commercial electrician page. Each service below links to its own page.

• Tenant improvements and build-outs. Power, lighting, panels and permits for new and remodeled retail, office and warehouse space. We work with the builder and the inspector.
• Panels, 100 to 600 amp. Service and distribution panel replacement for commercial buildings, with permit and inspection. Planned around the tenant's operating hours.
• Generators. Standby generators with an automatic transfer switch (ATS), and interlock setups. The gas line is run by a licensed plumbing or gas contractor. Permit and inspection apply.
• LED retrofits. We replace old fixtures with LED in offices, stores and industrial space, and reuse the existing circuits where they are sound.
• Warehouse LED high bays. We own a boom lift and have scissor lift access, so we can reach high ceilings without waiting on a rental.
• Parking lot lighting. New and replacement pole and wall fixtures, circuits and controls for commercial lots. In Miami-Dade and Broward, new poles, bases and exterior fixtures must meet the Florida Building Code's High-Velocity Hurricane Zone wind rules, and new pole foundations may need signed and sealed engineering.
• Electrical work for building recertification (the "40-year" inspection). A Florida-licensed engineer or architect inspects and signs the report. We do the permitted electrical repairs it calls for.
• Commercial data cabling. We pull, terminate and test cable. We do not configure network equipment.
• EV chargers for businesses and multifamily. Dedicated circuits and charger installs, permitted and inspected. Read our condo and multifamily EV charger guide.

Hialeah permits and inspections

• Electrical permits in Hialeah go through the City of Hialeah Building Department. When you hire a contractor, the contractor pulls the permit, and the work is inspected before the permit closes. Florida also allows owner-builder permits, and we advise hiring a licensed contractor.
• The electrical code is the National Electrical Code (NFPA 70), adopted through the Florida Building Code.
• Miami-Dade and Broward are the High-Velocity Hurricane Zone (HVHZ) under the Florida Building Code. Exterior equipment, light poles and generators installed there must be anchored for HVHZ wind loads, and some installs need signed and sealed engineering.
• Nearby cities can use a different permitting office, so we confirm the right one for each address.
• Some work, such as a recertification report, also needs an engineer or architect. We say so up front.

Neighborhoods and nearby areas we serve

We are based in Hialeah and work throughout Miami-Dade and Broward. We also serve Miami — see our Miami electrician page.

• Hialeah. Our home base. Residential and commercial work across the city.
• Hialeah Gardens. Commercial, warehouse and residential electrical work next door to our base.
• Miami Lakes. Office, retail and residential electrical work.
• Medley. Medley has many warehouse and light-industrial buildings, the kind of space we handle for lighting, panel and generator work.
• Miami Springs. Residential and small commercial electrical work.
• Miami-Dade County. Our main service area.
• Broward County. We take Broward work as well.

Why hire a licensed contractor

• Florida requires a license to contract for electrical work (Florida Statutes, Chapter 489, Part II). Solid Power Inc. holds Florida electrical contractor license EC13008432.
• Check it yourself. Go to MyFloridaLicense.com and search EC13008432 or our company name.
• A licensed contractor can pull the permit in the company's name. Unlicensed work can fail inspection and leave a permit that cannot be closed.
• Work done under a permit is inspected by the building department, which gives you a second set of eyes on the job.

Hialeah electrical FAQ

Who is a licensed electrician in Hialeah, FL?

Solid Power Inc. is a licensed Florida electrical contractor, license EC13008432, based in Hialeah. We do residential repairs and rewiring, and commercial work such as tenant build-outs, generators, EV chargers, LED lighting and data cabling, in Hialeah, Miami-Dade and Broward. Call 305-305-3619, Monday to Friday, 7:00 AM to 3:30 PM.

How do I check that an electrician in Hialeah is licensed?

Search the contractor's name or license number on MyFloridaLicense.com, the state's Department of Business and Professional Regulation lookup. Statewide certified electrical contractor licenses start with EC, and local registered licenses start with ER. Ours is EC13008432. The record shows the license status and business name. If the number is missing or does not match the company, ask before any work starts.

Do I need a permit for electrical work in Hialeah?

Most electrical work needs a permit through the City of Hialeah Building Department and an inspection before the permit closes. Only minor repair work is exempt. When you hire a contractor, the contractor pulls the permit. Florida also allows owner-builder permits, and we advise hiring a licensed contractor. The work must meet the NEC (NFPA 70) as adopted by the Florida Building Code.

Do you work outside Hialeah?

Yes. Besides Hialeah, we work in Hialeah Gardens, Miami Lakes, Medley and Miami Springs, and across Miami-Dade and Broward. Each city can have its own building department and permit steps, so we confirm them for the address before starting. Call 305-305-3619 to ask about a specific location.

What are your hours, and do you work after hours?

Our hours are Monday to Friday, 7:00 AM to 3:30 PM. After-hours work is by appointment only, and most work is scheduled in advance. Call 305-305-3619 or email office@solidpowerfl.com, tell us what you need, and we will tell you what we can schedule.

Can you replace high-bay lights in a Hialeah warehouse?

Yes. We install and replace LED high bays in warehouses. We own a boom lift and have scissor lift access for ceilings that need one. We review the layout, circuits and ceiling height first, and pull permits where they are required. Call 305-305-3619 to talk through your building.

Can you install a standby generator in Hialeah?

Yes. We install standby generators with an automatic transfer switch (ATS), and interlock setups for portable generators. Optional standby systems fall under NEC Article 702, and the work needs a permit and an inspection. The gas line is run by a licensed plumbing or gas contractor. Placement rules also apply, so we check them with the building department before the install.

Who does the electrical work for a building recertification in Miami-Dade or Broward?

A Florida-licensed engineer or architect inspects the building and signs the recertification report. Solid Power does not issue or sign it. When the report calls for electrical repairs, we do that permitted work, such as lighting, wiring and service equipment corrections. Miami-Dade starts at 30 years (25 for some coastal condo buildings), Broward at 25, then every 10 years.

Can you install an EV charger in Hialeah?

Yes, for homes and commercial properties. A charger usually needs its own dedicated circuit and a permit, and the installation follows NEC Article 625. We check the existing electrical service first. Call 305-305-3619 with your charger model and where you want it mounted.

Do you install network cabling for offices and warehouses?

Yes. We do commercial low-voltage data cabling at three levels: pathway only, pull and terminate, or pull, terminate and test. We do not configure switches, routers or other IT equipment, so your IT provider handles that part. Tell us which level you need when you call.

Call or email Solid Power Inc.

• Phone: 305-305-3619
• Email: office@solidpowerfl.com
• Hours: Monday to Friday, 7:00 AM to 3:30 PM. After-hours work by appointment only.
• License: Florida electrical contractor EC13008432
• Area: Hialeah, Hialeah Gardens, Miami Lakes, Medley, Miami Springs, Miami-Dade and Broward

Solid Power Inc. | Licensed Florida electrical contractor EC13008432 | Hialeah, FL | Serving Miami-Dade and Broward